MHT258a (Engl.)9-9
(c) Absolute data over flow
• Touch panel
• Detection (example)
The shaft extension of GYC/GYS type motor rotated beyond the range of −32768 to 0 to ＋32768 revolutions.
• Cause, check and remedy
On an absolute system, the number of revolutions of the motor shaft extension is limited.
For the alarm resetting method, see (b) above.
(d) Combination error
• Touch panel
• Detection (example)
The combination of connected amplifier and motor is not correct.
To Next Page
Loading...