Fuji Electric RYS...S3-VVS Series - Function List; Monitor Mode; Sequence Mode

MHT258a (Engl.)7-3
7.2 Function list
The setting value can be changed in parameter edit mode and positioning data edit mode.
Mode Sub-mode Sub-mode select Indication example
Sequence mode Sequence
Sub-mode
Alarm detection
Alarm history
Amplifier setting
Motor setting
Station No. setting
Monitor mode Feedback speed
Command speed
Actual torque
Feedback position
Command position
Deviation amount
Cumulated pulse
Peak torque
Input voltage 1
Input voltage 2
LS-Z pulse
Input signal
Output signal
Load inertia ratio