EasyManua.ls Logo

Fuji Electric RYS201S3-VVS - Control Power Input; Storage of Battery

Fuji Electric RYS201S3-VVS
251 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-20 MHT258a (Engl.)
(λ) Motor power for motor with providing brake
Connector kit type : WSK-M06P-CB ( 6-pin)
Application : GYS type motor 1 [kW] and above
Connector MS3108B24 - 10S
Cable clamp MS3057 - 16A
Mass : 200 [g]
(m) Control power input
Connector kit type : WSK-LO2P
Application : 0.75[kW] and below
Connector 231702/026 - 000
Manual lever 231 - 131
Mass : 4 [g]
(n) Battery
Connector kit type : WSB - S
Battery ER1733WK41 1PP
Nominal voltage : 3.6 [V]
Capacity : 1500 [mAh]
Refer to 6.3.
Storage of battery
If a battery has been out of service for long-term, the following procedures should be followed.
Battery should be stored in the storeroom. The storeroom should be well ventilated, and selected for possible protection against temperature and moisture.
Surrounding condition should be kept within10 to + 75 [] temperature and 10 to 90[%]RH humidity.
Storage term should be within two years.
Notch position
Rubber bush
42.9
4.8
79.6
90
43.7
26.3
14.5
50
±
5
36
16.5
±
0.5
ER17/33(2/3A)
3.6V

Table of Contents

Related product manuals