MHT258a (Engl.)5-2
Connect the control input/output signals to the connector 1 (CN1) on the amplifier.
The shape of the connector 1 (CN1) differs from types of amplifier as follows.
Amplifier connector 1 (CN1)
■ RYS□□□S3-VVS ■ RYS□□□S3-VSS
① (DI/DO, speed control) ② (SX bus, speed control)
Functions of terminals CONT1 to CONT8 and OUT1 to OUT5 can be changed according to the system para. setting.
Remarks:
The number in parentheses following the signal name on the previous page and hereinafter means the setting number to the system para.
For example, Before performing position control using pulse train input, set “position control” (37) to “CONT assignment.” Setting a number in
parentheses to the system para. 87 or 88 varidates a corresponding signal at all times.
Note: (*) para.: parameter
List of the basic parameter and system parameter: See 6.5.
＊ＣＡ36
＊ＣＢ34
＊ＦＡ32
＊ＦＢ30
＊ＦＺ28
ＯＵＴ３26
ＣＯＮＴ８24
ＣＯＮＴ２22
Ｐ２４20
ＮＲＥＦ17
ＴＲＥＦ15
Ｍ５13
Ｐ１０11
Ｍ５9
ＯＵＴ４7
ＯＵＴ１5
ＣＯＮＴ５3
ＣＯＮＴ３1
Ｍ５18
ＭＯＮ１16
ＭＯＮ２14
ＢＡＴ−12
ＢＡＴ＋10
ＯＵＴ５8
ＯＵＴ２6
ＣＯＮＴ６4
ＣＯＮＴ４2
ＣＡ35
ＣＢ33
ＦＡ31
ＦＢ29
ＦＺ27
Ｍ５25
ＣＯＮＴ７23
ＣＯＮＴ１21
Ｍ２４19
−25
−23
＊ＦＺ21
＊ＦＢ19
＊ＦＡ17
ＢＡＴ−15
−13
ＭＯＮ１11
Ｍ２４9
ＯＵＴ２7
ＣＯＮＴ５5
ＣＯＮＴ３3
ＣＯＮＴ１1
Ｍ５12
ＭＯＮ２10
Ｐ２４8
ＯＵＴ１6
ＣＯＮＴ４4
ＣＯＮＴ２2
24
−22
ＦＺ20
ＦＢ18
ＦＡ16
ＢＡＴ＋14
26 −
−
To Next Page
Loading...