Fuji Xerox ApeosPort-IV C3375 Administration Guide

System Settings Procedure
129
Tools
5
Step 5 Setting a Feature
1
Select any feature.
Note • Select a submenu from the [Group] list, and then select a feature from the [Features] list.
• Select [ ] or [ ] as required.
2 Select an item to set.
3 After setting the feature, select [Save].
4 Select [Close] repeatedly until the [Services Home] screen is displayed.
Note • If rebooting the machine is required to enable the new settings, when you select [Close] in the
[Tools] screen, a message may be displayed. Follow the message and reboot the machine. After the
machine reboots, it exits from the System Administration mode, and the <Log In/Out> button is
unlit.
Step 6 Exiting System Administration Mode
1
Press the <Log In/Out> button.
Note • You can also log out by pressing the login information field on the touch screen, and then selecting
[Logout].
• The <Log In/Out> button is unlit when the machine exits from the System Administration mode.

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm