Error Code
571
Problem Solving
15
* : XPS stands for XML Paper Specification.
Note • If you cannot resolve an error despite following the instructions described in the table, contact our
Customer Support Center. The contact number is printed on the label or card attached on the
machine.
Other Errors
This section describes the remedies when the following messages are displayed.
Error
Message
Cause and Remedy
A fault has occurred.
Switch off the machine.
(xxx-yyy)
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch the machine power on again.
If the message persists, record the content displayed for [(xxx-yyy)]. Then
immediately switch the main power and power off, make sure that the touch
screen is blank, and then contact our Customer Support Center.
Completed with an
error.
(xxx-yyy)
[Cause] An error occurred, and the operation terminated abnormally.
[Remedy] Execute the operation again.
A fault has occurred.
The machine has
rebooted. Select
[Close]. If the problem
persists, call for service.
(xxx-yyy)
[Cause] An auto-recoverable internal error occurred, and the machine restarted
automatically.
[Remedy] Select [Close] to use the machine normally. If the error still is not resolved,
contact our Customer Support Center.
To Next Page
Loading...
Need help?
General
