Cleaning the Machine
91
Maintenance
3
2 Wipe the document glass with the provided
cloth.
Note • If you cannot remove dirt easily, gently wipe
the document glass with a soft cloth
moistened with a small amount of neutral
detergent.
Important •Do not use cleaning agents other than water
or neutral detergent.
Cleaning Film and Constant Velocity Transport Glass (for Duplex Automatic
Document Feeder B1-C)
If the film or constant velocity transport glass become soiled, smudges may appear on
copies, faxes, or scanned documents and the machine may not properly detect document
sizes.
To ensure clear copies at all times, clean the film and the constant velocity transport glass
once a month.
Important •Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying, faxing, or scanning.
1 Wipe the film with a soft cloth moistened with
water to remove any dirt, and then wipe it with
a soft, dry cloth.
Important •Do not press the film with an excessive force
as it can be easily damaged.
• Do not use cleaning agents other than water
or neutral detergent.
Note • If you cannot remove dirt easily, gently wipe
the film with a soft cloth moistened with a
small amount of neutral detergent.
2 Wipe the constant velocity transport glass with
a soft cloth moistened with water to remove
any dirt, and then wipe it with a soft dry cloth.
Important •Do not use cleaning agents other than water
or neutral detergent.
Note • If you cannot remove dirt easily, gently wipe
the glass with a soft cloth moistened with a
small amount of neutral detergent.
Cleaning Film and Constant Velocity Transport Glass (for Duplex Automatic
Document Feeder B1-PC)
If the film or constant velocity transport glass become soiled, smudges may appear on
copies, faxes, or scanned documents and the machine may not properly detect document
sizes.
To Next Page
Loading...
Need help?
General
