Fuji Xerox ApeosPort-IV C3375 Administration Guide

Stapler Faults
599
Problem Solving
15
Staple Jams in Staple Cartridge (For Finisher-C1 or Finisher-C1
with Booklet Maker)
This section describes how to clear staple jam occurred in the staple cartridge of the Finisher-
C1 (optional) and the Finisher-C1 with Booklet Maker (optional).
This section explains the procedures to remove the jammed staples in the C1-Finisher with
Booklet Maker, as an example. You can apply the same procedures to the Finisher-C1.
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Grasp the handle R1 of the staple cartridge
holder, and pull out the holder to the right,
towards you.
3 Take out the staple cartridge.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
4 After you take out the staple cartridge, check
inside of the finisher for any remaining staples.

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm