Fuji Xerox ApeosPort-IV C3375 Administration Guide

Installation When Using TCP/IP (LPD/Port 9100)
325
Printer Environment Settings
7
z
Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note • The spool destination can be configured when the LPD port is enabled.
z
Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])
z
Port Settings
z
IP Mode
z
Host Name
z
IPv4
- IP Address Resolution
- Port Settings
-IP Address
- Subnet Mask
- Gateway Address
z
IPv6
- Enable Manual Address
-IP Address
- Link-Local Address
- Gateway Address
z
Domain Name
z
DNS Configuration
-IPv4
-IPv6
z
DHCP/DDNS
z
WINS Server
z
Port Number
z
TBCP Filter
Note • The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.
z
Connection Time-Out
z
Maximum Number of Sessions
Note • The Maximum Number of Sessions can be configured when the LPD port is enabled.
z
TCP-MSS Mode
z
IPv4 Subnet Mask when TCP-MSS Mode is enabled
z
IP Filtering
-IPv4 Filtering
-IPv6 Filtering

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm