Fuji Xerox ApeosPort-IV C3375 Administration Guide

15 Problem Solving
458
Problem Solving
15
The output color
differs between
Secure Print and
Print Stored File.
This is because the print path
is different. The output color
of Print Stored File is
reproduced by the presence
or absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is reproduced
using density by default, as
with printing.
To closer match the color of Secure Print and
files in folder, select [On] in [Image Options]
> [Print Page Mode] on the [Advanced] tab of
the print driver settings.
The print color
differs from
before.
The color calibration is
incorrect.
Execute auto calibration.
Refer to "Executing Calibration" (P.94).
Black lines are
printed.
A print driver for another
machine is used.
Install the print driver for your device.
Symptom Cause Remedy

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm