EasyManuals Logo

Fuji Xerox ApeosPort-IV C3375 Administration Guide

Fuji Xerox ApeosPort-IV C3375
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #621 background imageLoading...
Page #621 background image
Specifications
621
Appendix
16
*1 : Based on when larger size paper is stacked on paper.
*2 : For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job with center binding/folding
specified was output, remove the output paper from the tray to output the next job. In addition, when you print a job with
cente
*3 : For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-B1 is required.
îš„ Finisher-C1 (optional)
Booklet Finishing*2 Capacity : 15 sheets (center binding), 5 sheets (folding)
Paper Size : Maximum: A3, 11 x 17",
Minimum: A4, 8.5 x 11"
Paper Weight : 64 - 80 gsm (center binding),
64 - 105 gsm (folding)
Important • When using 80 gsm paper
Dimensions/Weight Width 620 x Depth 552 x Height 987 mm, 28 kg
Width 620 x Depth 597 x Height 1,057 mm, 37 kg (When the Booklet
Maker Unit is attached)
Space Requirement (when
connected to the main
unit)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1, when the
extension tray and the bypass tray are fully extended)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1 + Booklet Maker
Unit, when the extension tray and the bypass tray are fully extended)
Type Output tray x 1 : Sorting/Stacking
Finisher tray x 1 : Sorting (Offset available)/
Stacking (Offset available)
Paper Size/Paper Weight Output tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Finisher tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4 : 3,000 sheets
B4 or larger : 1,500 sheets
Mixed stack* : 300 sheets
Finisher tray (For paper stapled)
A4 : 200 sets or 3,000 sheets
B4 or larger : 100 sets or 1,500 sheets
* : *Based on when larger size paper is stacked on paper.
Important • When using 80 gsm paper
Staple Capacity : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
Paper size : A3, 11 x 17", B4, A4, A4 , 8.5 x 11", 8.5 x 11" , B5
Number of Holes : 2/4 holes (Option: US 2/3 holes)
Paper Weight : 55 - 220 gsm
Important • When using 80 gsm paper
Dimensions/Weight Width 817 x Depth 639 x Height 1,058mm, 60 kg
Space Requirement (when
connected to the main
unit)
Width 1,863 x Depth 699 mm (Main unit + Finisher-C1, when the
extension tray and the bypass tray are fully extended)

Table of Contents

Other manuals for Fuji Xerox ApeosPort-IV C3375

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV C3375 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV C3375 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
FunctionsPrint, Copy, Scan, Fax
Duplex PrintingYes
Memory (Standard)2 GB
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Fax Transmission Speed33.6 kbps
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed35 ppm
ConnectivityEthernet, USB
Paper SizeA3, A4, A5, B4, B5
Hard Drive160 GB
Network ConnectivityEthernet
Copy Speed (Color)35 cpm
Copy Speed (Mono)35 cpm

Related product manuals