Fuji Xerox DocuCentre-V 3060 User Manual

Problem Solving
582
Problem Solving
15
093-336
093-337
093-338
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
099-364
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
099-396
099-397
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
099-398
099-399
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
102-356
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
103-310
103-311
103-312
103-313
103-314
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
112-700
[Cause] The finisher's hole punch waste container is full.
[Remedy] Empty the hole punch waste container.
Reference
z
For more information on how to empty the hole punch waste container, refer to "Emptying
Punch Waste Container (for Finisher-B1)" (P.79).
116-220
[Cause] Failed to enter the Download mode.
[Remedy] Contact our Customer Support Center.
116-310
116-311
116-312
116-313
116-314
116-319
116-321
116-322
116-323
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy

Fuji Xerox DocuCentre-V 3060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V 3060
Category	All in One Printer
Language	English