Activity Report
729
Appendix
16
Status Auto Send : The document is being re-sent and the set re-
send times has not been exceeded.
Canceled : The communication was terminated.
Check Remote
Station
: An error caused by the recipient or the line
during communication.
Send Again : The document must be re-sent because the
re-send times have reached the maximum
due to a transmission error.
Receive Again : A polling request must be re-sent due to a
polling reception error.Or, you must ask a
sender to resend the document due to a
reception error.
Disconnected : Check that the line is properly connected.
When IP Fax (SIP) is used, check that the
network cable is properly connected.
XXX-XXX : Error code
z
For more information on lines, refer to "2 Product Overview" > "Machine
Components" > "Telephone line connectors" in the User Guide and for more
information on XXX-XXX (error code), refer to Error Code(P.482).
z
For more information on how to connect network cables, refer to
"Using the Ethernet Interface" (P.21)
Total All pages received or sent are recorded.
Item Description
To Next Page
Loading...
Need help?
General
