4 Paper and Other Media
50
Paper and Other Media
4
3 Push the tray in gently until it comes to a stop.
Loading Paper in Trays 3 to 4
Following describes the procedure for loading paper in trays 3 to 4.
1 Pull out the tray towards you until it
stops.
2 Align the paper stack and load it
with the side to be copied or printed
facing up
Important • Do not load paper exceeding
the maximum fill line.Doing so
might cause paper jams or
machine trouble.
• Do not put paper or anything
on the empty space on the
right side of the trays 3 to 4.
Doing so might cause paper
jams or machine trouble.
• Make sure that the paper guide
is adjusted to the size of the
paper loaded.
3 Push the tray in gently until it comes to a stop.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
MAX
To Next Page
Loading...
Need help?
General
