6 Problem Solving
72
Problem Solving
6
Fault Clearance Procedure
If a fault or problem occurs, there are several ways in which you can identify the type
of fault. Once a fault or problem is identified, establish the probable cause, and then
apply the appropriate solution.
z
If a fault occurs, first refer to the screen messages and animated graphics and clear
the fault in the order specified.
z
If the problem is not solved by following the screen messages and graphics, contact
the System Administrator for assistance.
z
Alternatively, contact the System Administrator for assistance.
z
In some cases, it may be necessary to switch the machine off and then on. "Power
On / Off" (P.14)
To Next Page
Loading...
Need help?
General
