Fuji Xerox DocuPrint CP405 d

Using the Operator Panel Menus 189
• Tray1
Purpose:
To specify the paper loaded in the standard 550 sheet tray.
*1
The default for Paper Size varies depending on region-specific factory default.
NOTE:
• For more information on supported paper sizes, see also "Usable Print Media" on page 112.
Paper Size A4 - 210x297
*1
mm series B5 - 182x257
A5 - 148x210
Letter - 8.5x11
Executive
Folio - 8.5x13
Legal - 8.5x14
New Custom Size Portrait(Y) 297 mm
*
Specifies the length of the custom
size paper.
210 - 355 mm
Landscape(X) 210 mm
*
Specifies the width of the custom
size paper.
148 - 215 mm
inch series Letter - 8.5x11
*1
Executive
Folio - 8.5x13
Legal - 8.5x14
A4 - 210x297
B5 - 182x257
A5 - 148x210
New Custom Size Portrait(Y) 11.7
"*
Specifies the length of the custom
size paper.
8.3-14.0"
Landscape(X) 8.3
"*
Specifies the width of the custom
size paper.
5.8-8.5"
Paper Type Plain
*
Other Type
Light Card
Heavy Card
LW Gloss Card
HW Gloss Card
Letterhead
Hole Punched
Colored
Display
Screen
Off Does not display a popup menu that prompts to set Paper Type and Paper Size
when paper is loaded in the standard 550 sheet tray.
On
*
Displays a popup menu that prompts to set Paper Type and Paper Size when paper
is loaded in the standard 550 sheet tray.