Using the Operator Panel Menus 151
Print Meter
Purpose:
To print the reports for the total number of pages printed.
Demo Page
Purpose:
To print a test page.
Stored Documents
NOTE:
• Stored Documents feature is available only when the optional 512MB memory is installed on the printer and RAM Disk under
System Settings is enabled.
Purpose:
To print a list of all files stored for Secure Print and Sample Print in the RAM disk.
Meter Readings
Purpose:
To check the total number of printed pages.
Values:
*1
This item always shows 0 on your printer.
Admin Menu
Use the Admin Menu menu to configure a variety of printer features.
PCL Settings
Use the PCL Settings menu to change printer settings that only affect jobs using the PCL emulation printer
language.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Paper Tray
Purpose:
To specify the default paper tray.
Values:
*1
Tray2 is available only when the optional 250 sheet feeder is installed.
Meter 1
*1
Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3
*1
Displays the total number of large size color prints.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 + Meter 2).
Auto
*
Bypass Tray
Tray1
Tray2
*1
To Next Page
Loading...
