Fuji Xerox DocuPrint P355 d

Using the Operator Panel Menus 177
Bypass Tray
Purpose:
To specify the paper loaded in the bypass tray.
Values:
Paper Size
mm series
Driver Size
*
A4 - 210x297
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
Monarch Env.
DL Env- 110x220
C5 Env- 162x229
#10Env- 4.1x9.5
New Custom Size Portrait(Y) 297 mm* Specifies the length of
the custom size paper.
127 - 355 mm
Landscape(X) 210 mm* Specifies the width of
the custom size paper.
77 - 215 mm
inch series Driver Size
*
Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
A4 - 210x297
A5 - 148x210
B5 - 182x257
Monarch Env.
DL Env- 110x220
C5 Env- 162x229
#10Env- 4.1x9.5
New Custom Size Portrait(Y) 11.7"* Specifies the length of
the custom size paper.
5.0-14.0"
Landscape(X) 8.3"* Specifies the width of
the custom size paper.
3.0-8.5"
Paper Type Plain
*
Plain Thick
Light Card
Heavy Card
Envelope
Labels
Letterhead
Hole Punched
Colored
Other Type
MPT mode Panel Specified Configures the paper size and type on the operator panel.
DriverSpecified
*
Configures the paper size and type on the print driver.