Using the Operator Panel Menus 175
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Panel Lock
Purpose:
To set a limited access to Admin Menu with a password, and to set or change the password.
See also:
• "Panel Lock Function" on page 181
Values:
*1
This item is available only when Panel Lock Set is set to Enable.
• Login Error
NOTE:
• Login Error feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin Menu and
Report / List menu.
Values:
Panel Lock Set Disable
*
Disables password protection for Admin Menu.
Enable Enables password protection for Admin Menu.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin
Menu.
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5 times
*
Sets the number of error entry attempts allowed when an
administrator logs in.
1-10
To Next Page
Loading...
