230 Maintenance
Cleaning the Printer
This section describes how to clean the printer in order to maintain it in good condition and print clean printouts all
the time.
This section includes:
• "Cleaning Inside the Printer" on page 230
Cleaning Inside the Printer
Clean the feed roller inside the printer if print media does not feed correctly.
1 Turn off the printer and disconnect the power cord.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
2 Gently pull open the bypass tray cover.
3 Grasp both sides of the bypass tray, and then pull the bypass tray from the printer.
• When cleaning this product, use the designated cleaning materials exclusive to it. Other cleaning materials may
result in poor performance of the product. Never use aerosol cleaners to avoid catching fire and explosion.
• When cleaning this product, always switch off and unplug it. Access to a live machine interior may cause electric
shock.
To Next Page
Loading...
Need help?
General
