180 Using the Operator Panel Menus
Tray Priority
Purpose:
To set the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper size
and type exists, the paper tray is selected according to this priority order.
Values:
NOTE:
• Tray2 and 3rd Priority are available only when the optional 250 sheet feeder is installed.
• The paper tray selected for 1st Priority is not displayed in 2nd Priority, and the paper trays selected for 1st
Priority and 2nd Priority are not displayed in 3rd Priority.
1st Priority Bypass Tray
*
Sets the bypass tray as the first priority.
Tray1 Sets the standard 250 sheet tray as the first
priority.
Tray2 Sets the optional 250 sheet feeder as the first
priority.
2nd Priority Bypass Tray Sets the bypass tray as the second priority.
Tray1
*
Sets the standard 250 sheet tray as the
second priority.
Tray2 Sets the optional 250 sheet feeder as the
second priority.
3rd Priority Bypass Tray Sets the bypass tray as the third priority.
Tray1 Sets the standard 250 sheet tray as the third
priority.
Tray2
*
Sets the optional 250 sheet feeder as the
third priority.
To Next Page
Loading...
Need help?
General
