36 Basic Operation
Installing Optional Accessories
You can make the printer more functional by installing the optional accessories such as the 512MB Memory, the 250
Sheet Feeder(SFP), the Wireless Network Kit b/g/n, and the Font Kit. This section describes how to install these
printer's options.
This section includes:
• "Installing the Optional 512MB Memory" on page 36
• "Installing the Optional 250 Sheet Feeder" on page 41
• "Installing the Optional Wireless Printer Adapter (DocuPrint P355 d Only)" on page 47
• "Installing the Optional Font ROM" on page 52
Installing the Optional 512MB Memory
NOTE:
• Your printer supports additional 512 MB memory module.
1 Turn off the printer.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
2 Turn the screw on the control board cover counterclockwise.
NOTE:
• Loosen the screw. You do not need to remove the screw.
3 Slide the control board cover towards the rear of the printer and remove the cover.
To Next Page
Loading...
Need help?
General
