208 Troubleshooting
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 209
• "Toner Smears or Print Comes Off" on page 210
• "Random Spots/Blurred Images" on page 211
• "The Entire Output Is Blank" on page 212
• "Streaks Appear on the Output" on page 213
• "Vertical Blanks" on page 214
• "Mottle" on page 214
• "Ghosting" on page 215
• "Light-Induced Fatigue" on page 215
• "Fog" on page 216
• "Bead-Carry-Out (BCO)" on page 216
• "Jagged Characters" on page 217
• "Banding" on page 217
• "Auger Mark" on page 218
• "Wrinkled/Stained Paper" on page 218
• "Damage on the Leading Edge of Paper" on page 219
• "The Top and Side Margins Are Incorrect" on page 219
• "Protrudent/Bumpy Paper" on page 220
• "Images Are Skewed" on page 220
NOTE:
• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.
See also:
• "Understanding the Printer Menus" on page 150
• "CentreWare Internet Services (DocuPrint P355 d Only)" on page 61
To Next Page
Loading...
Need help?
General
