Maintenance 255
Removing the Optional 250 Sheet Feeder
IMPORTANT:
• When you remove the optional 250 sheet feeder (Tray2), be sure to turn off the printer, unplug the power cord, and disconnect
all cables from the back of the printer before starting these tasks.
1 Turn off the printer.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
2 Disconnect the power cord from the power connector on the rear of the printer.
3 Gently pull open the bypass tray cover.
4 Grasp both sides of the bypass tray, and then pull the bypass tray from the printer.
To Next Page
Loading...
