38 Basic Operation
8 Turn on the printer.
9 Print the Printer Settings page to confirm that the newly installed memory module is detected by the printer.
a Press the (Menu) button.
b Select Report / List, and then press the button.
c Select Printer Settings, and then press the button.
The Printer Settings page is printed.
10 Confirm the amount of Memory Capacity listed under General in the Printer Settings page.
If the memory capacity has not increased, turn off the printer, and re-install the memory module.
11 If you installed the optional 512MB memory after installing the print driver, update your driver by following the
instructions for the operating system you are using. If the printer is on a network, update the driver for each
client.
To Next Page
Loading...
Need help?
General
