44 Basic Operation
16 Confirm Tray 2 (250 Sheet Feeder) is listed under Printer Options in the Printer Settings page.
If the feeder is not listed, turn off the printer, unplug the power cord, and re-install the optional 250 sheet feeder.
17 After loading paper in the optional 250 sheet feeder, specify the paper type from the printer operator panel.
a Press the (Menu) button.
b Select Tray Settings, and then press the
button
.
c Select Tray 2, and then press the
button
.
d Select Paper Type, and then press the
button
.
e Select the paper type for the optional 250 sheet feeder, and then press the
button
.
18 If you installed the optional 250 sheet feeder after installing the print driver, update your driver by following the
instructions for each operating system. If the printer is on a network, update the driver for each client.
To Next Page
Loading...
