Fuji Xerox DocuPrint P505 d User Manual

Connectivity
113
CentreWare Internet Services
7
Port 9100
 Port
Select this to use Port 9100.
Select this option when the communication protocol is in RAW format for Windows
®
Standard TCP/IP port monitor.
 Port Number
Enter a port number for Port 9100 from 1 to 65535.
The default value is 9100.
Important

Do not use the numbers assigned to the other ports.
 PJL
Select this to enable PJL. PJL allows you to specify the printer language to use for your next
job regardless of the printer language currently being used.
 Print Mode
Select a print mode. Selecting [Auto] enables the machine to automatically determine and
use the most suitable language to print data received from the host device.
 Timeout
Sets the connection time-out period.
 TBCP Filter
Select this to enable TBCP filter for PostScript data. When the transmission data includes
binary data or EPS data, disable this.
 TCP-MSS
Select this to enable the TCP-MSS mode.
 IPv4 Subnet 1 to 3
Enter a subnet address.
SMB
 Port
Select this to enable the port.
 WINS Server Address Acquisition by DHCP
Select this to get a WINS server address through DHCP. This is effective when the [Mode]
setting for [IPv4] is set to [DHCP].
 Primary WINS Server Address, Secondary WINS Server Address
When disabling [WINS Server Address Acquisition by DHCP], enter a server address.
SMTP
Configure the SMTP server settings.
 Email Notification
Set whether or not to enable the e-mail notification port.

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English