System
127
CentreWare Internet Services
7
Low Power Timeout
Specify a time period to enter the Low Power mode after the last operation.
Sleep Timeout
Specify a time period to enter the Sleep mode after entering the Low Power mode.
Auto Power Off
Auto Power Off
Automatically turns the printer off after a specified time has elapsed from the Sleep mode.
When using this feature, enter a value for turning the printer off in [Auto Power Off
Timeout].
[Off]
Does not use this feature.
[Always Allowed]
Turns the printer off when the specified time has elapsed.
[Allowed ONLY When Conditions are Met]
Turns the printer off only when the following conditions are all met for the specified time.
- The USB device port is not used.
- The wired network port is not used.
- The wireless connection is not used.
Timeouts
Reset Device Control Panel
System Timeout
Specify the time lapsed without any operation on the control panel until the machine resets
the settings and logs you out automatically.
Reset Device Website
Device Website Timeout
Specify the time lapsed without any operation on CentreWare Internet Services until you
log out automatically.
Security
Firmware Verification
Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit
log.
The information may not be recorded in the audit log depending on the status of program malfunction.