Maintenance
172
Maintenance
10
For Side Registration, a positive value shifts the image to the left.
6 To save your settings, touch [OK].
7 As needed, to enter additional values, repeat the previous steps.
8 Print another sample page, then repeat the process until you complete the registration
corrections.
9 Press the Home button.
Transfer Voltage Adjustment
Use Transfer Voltage Adjustment to specify the bias transfer roller voltage for printing on
the selected paper type. If the printed image is too light, increase the voltage for the paper
you are using. If the printed image is mottled or blotchy-looking, decrease the voltage for
the paper you are using.
Depending on the machine settings, you may need to log in as the system administrator.
1 Press the Home button.
2 Touch [Device] > [Support] > [Transfer Voltage Adjustment].
3 Touch [Paper Type] and select the paper type.
4 To adjust the transfer voltage, for [Voltage Level], touch the Plus icon (+) or the Minus icon
(-).
5 Touch [Adjust].
6 To exit the menu, touch X.
7 Press the Home button.
Adjusting the Fusing Unit
Use Adjust Fusing Unit for optimum print quality across a wide range of paper types. If the
toner on a print is smearing or can be rubbed off the paper, increase the temperature for
To Next Page
Loading...
Need help?
General
