Error Code
239
Problem Solving
11
029-706 [Cause]
Wi-Fi error. A connection error occurred when he printer obtains a
proxy auto-config (PAC) file.
[Remedy]
Check and correct the following:
LAN cable connection
Default gateway configuration
Subnet mask configuration
DNS server address configuration
If the failure persists, the network or the HTTP server may have a
problem. Consult your network administrator.
If the error still is not resolved, contact our Customer Support
Center.
029-707 [Cause]
Wi-Fi error. An error occurred when the printer obtains a proxy
auto-config (PAC) file. The file was not found.
[Remedy]
When [Setup] in [Enable Proxy Server] is set to [Manual], check the
file location setting. When [Setup] in [Enable Proxy Server] is set to
[Configuration Script], the file location setting on the DHCP server
may have a problem. Consult your network administrator.
If the file location setting is correct, check on the HTTP server to
see if the PAC file exists.
If the error still is not resolved, contact our Customer Support
Center.
029-708 [Cause]
Wi-Fi error. The proxy auto-config (PAC) file is invalid.
[Remedy]
When [Setup] in [Enable Proxy Server] is set to [Manual], check the
file location setting. When [Setup] in [Enable Proxy Server] is set to
[Configuration Script], the file location setting on the DHCP server
may have a problem. Consult your network administrator.
If the error still is not resolved, contact our Customer Support
Center.
029-709 [Cause]
Wi-Fi error. A timeout error occurred when the printer obtains the
URL of a proxy auto-config (PAC) file.
[Remedy]
Check and correct the following:
LAN cable connection
Default gateway configuration
Subnet mask configuration
If the failure persists, the network or the DHCP server may have a
problem. Consult your network administrator.
If the error still is not resolved, contact our Customer Support
Center.
029-710 [Cause]
Wi-Fi error. An error occurred when the printer obtains a proxy
auto-config (PAC) file. The file was not found.
[Remedy]
Check with your network administrator to see if the URL of the
PAC file is registered in the DHCP server.
If the error still is not resolved, contact our Customer Support
Center.
Error
Code
Cause/Remedy