Paper Jams
265
Problem Solving
11
4 For the same tray, at the back of the printer, locate the jam-access door. Open the door to
remove any jammed paper.
5 Insert the tray into the printer, then push the tray in until it stops.
If the tray is extended for Legal-size paper, the tray protrudes when it is inserted into the printer. If removed
in a previous step, replace the tray cover.
6 If [Tray Mode] is set to [Fully Adjustable], you are prompted to verify or change the paper
settings.
1) To confirm the same paper size, type, or color, select [OK].
2) To select a new paper size, type, or color, touch the current setting, then select a new
setting. Select [OK] to save the settings.
To Next Page
Loading...
