Device
78
Device
6
Daylight Savings Time
Select this to enable daylight saving time.
Date Format
Select a date format.
[mm/dd/yyyy]
[dd/mm/yyyy]
[yyyy/mm/dd]
Use 24 Hour Clock
Select this to use 24-hour clock. To use 12-hour clock, deselect this.
System Timeout
Specify the time lapsed without any operation on the control panel until the machine resets
the settings automatically.
Display Brightness
You can adjust the brightness of the touch panel between level 1 and level 7.
Sounds
Enable Sounds
Select this to activate sounds. Touch an event, and use the slider bar to set the volume of
the sound.
Touch
Sounds when you touch an item on a screen displayed on the control panel correctly.
Job Completion
Sounds when a job is completed successfully.
Login
Sounds when you log in to the printer.
Error / Fault
Sounds when a job fails or an error occurs.
Power
Sounds when the machine is ready for operation, or is powered on.
Mobile Device Connected
Sounds when the printer detects a mobile device.
Power Saver
The Power Saver mode has two modes: Low Power and Sleep. When a specified period of
time has elapsed, the machine switches to these modes in the following order to reduce
power consumption.
Last operation on the machine Low Power mode Sleep mode.
For [Low Power Timeout] and [Sleep Timeout], you can enter values of up to 60 minutes in total.