Device
80
Device
6
[BOOTP]
The address, subnet mask, and gateway address will automatically be set via BOOTP.
This is displayed only when this option is configured on CentreWare Internet Services.
[DHCP]
The address, subnet mask, and gateway address will automatically be set via DHCP.
Host Name
Enter a host name.
IPv4 Address
Displays the IP address.
Gateway Address
Displays the gateway address.
Subnet Mask
Displays the subnet mask.
IPv6
Enable IPv6
Select this to enable the IPv6 mode.
Host Name
Enter a host name.
Link-Local Address
Displays the Link-Local address.
Self-Assigned Address
Displays the self-assigned address.
Manual Address
Allows you to enter an address.
DHCPv6 Configuration
Select a purpose of using DHCPv6.
[Direct by Router]
[Address Assignment and Configuration]
[Configuration Data]
DNS
Host Name
Displays the host name.
Domain Name
Enter a domain name.
IPv4 Servers
Tap this to set addresses.