40
• The third screen of “2 Film Carrier Cleaning”
appears.
8
Blow off any dirt or dust adhering to the upper
and lower surfaces of the diffusion plates on the
135 full lower mask and 135 half lower mask
(optional) using the blower brush.
IMPORTANT
• Do not use alcohol solution to clean the
diffusion plates.
• Do not drop the mask on the glass surfaces of
the feed lanes. Otherwise the glass surfaces
may be damaged.
9
Click the [Next Page] button.
• The fourth screen of “2 Film Carrier Cleaning”
appears.
10
Remove any dirt or dust adhering to the dust
removal brushes and rollers.
• Do not drop the 135 insertion section upper
guide on the glass surfaces of the feed lanes.
Otherwise the glass surfaces may be damaged.
Blower Blush
135 Full Lower Mask
Diffusion Plates
Diffusion
Plates
EZ2004
Dust Removal Rollers (2)
Dust Removal Brushes
Z2005R
F355/375/570
distributed by www.minilablaser.com
To Next Page
