PC cards Working with your notebook
A26391-LJ1-Z120-1-7619 33
PC cards
Two PC card slots (CardBus and PCMCIA) enable the notebook to operate two type II PC cards or
one type III PC card.
!
The PC card must not consume more than 600 mA (at +5 V) or 60 mA (at +12 V).
Consult the documentation supplied by the PC card's manufacturer and follow the
instructions provided.
Never use force when inserting or removing a PC card.
Make sure that foreign objects do not fall into the PC card slot.
Installing a PC card
Ê Insert the PC card, contacts first, into the lower slot guide. The labelled side of the PC card
must be facing upward.
Ê Gently push the PC card into the slot until you feel it click into place.
i
Consult the documentation supplied with the PC card for information on how to install the
necessary device drivers.
For further information refer to the information files (e.g. *.TXT, *.DOC, *.WRI,or*.HLP)
provided on the PC card driver diskette or the information in the operating system manual.
To Next Page
Loading...
Need help?
General
