Connecting external devices Using the parallel port
40 A26391-LJ1-Z120-1-7619
Serial mouse
Ê Switch off the notebook.
Ê Connect the mouse to the parallel port on your notebook.
Ê Run the mouse service programme under Start - Settings - Control Panel and select the General
tab.
Ê Select the correct mouse type.
Ê Restart the notebook.
Using the parallel port
Ê Switch off the notebook.
Ê Connect the data cable of the printer to the parallel port on the notebook.
Ê Plug the power cable of the printer into the mains outlet.
Ê First switch on the printer, then the notebook.
Using the serial port
Ê Switch off the notebook.
Ê Connect the data cable of the printer to the parallel port on the notebook.
Ê Plug the power cable of the printer into the mains outlet.
Ê First switch on the printer, then the notebook.
Establishing a direct connection to a PC
Ê Produce a parallel or serial cable connection.
Ê Select Start - Settings - Control Panel - Network and release the folder or the printer with the
Release option.
Ê Start the server (Host) and configure it.
Ê Select Start - Programs - Accessories - Communication and click on PC direct connection to start
the assistant. Select Host and follow the instructions.
Ê Start the client (guest) and configure it using the same assistant as for the host.
Ê Select Guest in the last selection.
To Next Page
Loading...
Need help?
General
