A26391-LJ1-Z120-1-7619 43
Settings in BIOS Setup
In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The
settings can only be changed via the keyboard.
When it is delivered, the notebook is set to factory default settings. You can change these settings
in BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.
The BIOS Setup programme contains the following menus:
• Main: for system settings as time, date, hard disk and monitor selection
• Advanced: for system settings such as interfaces and keyboard, audio and video
functions
• Security: for password settings and safety functions
• Power: for setting the energy saving functions
• Boot: for configuring the boot sequence
•
Info: displays the system configuration, such as for the processor and memory
capacity
• Exit: to exit the BIOS Setup
Start BIOS Setup
Ê Restart the notebook (switching ON/OFF or warm boot).
Ê When the message Press F2 to enter Setup appears, press the key [F2]
[F2][F2]
[F2].
i
If a password has been assigned:
Ê Enter the password and press the Enter key.
Ê If you have forgotten the password, contact your system administrator or contact our
Hotline/Help Desk.
Operating BIOS Setup
Ê Use the cursor key å
åå
å or ç
çç
ç to select the menu you wish to access to make changes.
Ê Press the Enter key.
The menu is displayed on the screen.
Ê Use the cursor key æ
ææ
æ or è
èè
è to select the field you wish to change.
Ê Press the space bar to confirm your selection.
Ê Press the [ESC]
[ESC][ESC]
[ESC] key to exit the selected menu.
Ê Press the [F1]
[F1][F1]
[F1] key to display help on the operation of BIOS Setup.
The description of the individual settings is shown in the right-hand window of the BIOS Setup.
Ê Make a note of the changes you have made (here in this manual, for example).
Ê Using the [F9]
[F9][F9]
[F9] function key, you can load the default settings for the BIOS Setup menu you are
currently in.
To Next Page
Loading...
Need help?
General
