A26361-K520-Z300-3-7619 7
Preparing for use
!
Please take note of the safety information in the "Important notes" chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
Ê Unpack all the individual parts.
Ê Check the delivery for damage incurred during transportation.
Ê Check whether the delivery agrees with the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
Steps for initial setup
First-time setup includes the connection of the monitor, mouse, and keyboard to the PC and the
setup of the supplied software.
i
Drives and boards
If you have received drives or boards with your PC, please do not install them until after
first-time setup. How to install drives and boards is described in the "System expansions"
chapter.
Setting up the PC
!
When installing your PC, give consideration to the recommendations and safety notes in
the "Safety, Warranty and Ergonomics" booklet.
Set up the PC only in its correct orientation. The points to observe are illustrated on the
following pages.
We recommend that you place your equipment on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is possible
that the rubber feet of the devices will mark the surface they stand on.
Do not expose the PC to extreme environmental conditions (see "Technical data" chapter)
and protect it from dust, humidity and heat.
Provide at least 200 mm of clearance to the right of, to the left of, in front of, and behind
the ventilator area of the PC to ensure adequate ventilation. Do not cover the ventilation
area of the monitor or the PC.
Do not place several PCs one above the other.
To Next Page
Loading...
Need help?
General
