Fujitsu Siemens Computers SCENIC eB User Manual

Connecting the PC to the mains voltage Preparing for use
A26361-K520-Z300-3-7619 13
Connecting the PC to the mains voltage
i
Depending on the version, your PC is equipped with a main switch on the back of the
system unit in addition to the ON/OFF switch on the front. This differentiates the setting of
the main voltage of the two PC versions.
100 V - 127 V 200 V - 240 V
1 1
100 V - 127 V 200 V - 240 V
1 = Notch for inserting the screwdriver
If the power supply of your PC does not have a manual voltage adjuster for setting the rated voltage,
then your system automatically sets itself to the local rated voltage. If you have a PC with a manual
voltage adjuster, then you must match the set rated voltage to the local rated voltage.
Ê Check the voltage setting.
!
The value indicated respectively marked with an arrow must agree with the local mains
voltage: 115 = 100 V to 127 V / 230 = 200 V to 240 V
On systems with main switch On systems without main switch
Ê Lift out the manual voltage adjuster with a
screwdriver (1), turn it to the required
setting and replace it.
Ê Push the switch in the appropriate
direction.

Fujitsu Siemens Computers SCENIC eB Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENIC eB
Category	Desktop
Language	English