Settings in BIOS Setup Operation
A26361-K520-Z300-3-7619 25
Settings in BIOS Setup
The BIOS Setup menu allows you to set your hardware configuration and system functions. When the
PC is delivered, the default entries are valid (see Technical Manual for the system board or the
manual "BIOS Setup"). You may customise these settings to your requirements in the BIOS Setup.
The Technical Manual for the system board or the "BIOS Setup" manual shows you how to start and
use the BIOS Setup. The menus and setting options provided by the BIOS Setup are also described in
detail.
Property and data protection
Software functions and mechanical locking offer a broad range of functions for protecting your PC
and your personal data from unauthorised access. You can also combine these functions.
Mechanical casing lock
With the casing lock you can mechanically lock the workstation, and with the drive cover you can
block access to the drives.
Anti-theft protection and lead-sealing
To prevent unauthorised persons from opening the casing, the casing can be sealed. To do this, use
the eyes (1) on the back of the casing.
There are two ways to protect your PC from theft:
· with the Kensington Lock device (2) and with a Kensington MicroSaver
· with a chain and the eyelet (3)
2
1
3
Access authorisation via SmartCard
In systems equipped with a SmartCard reader, access can be restricted to those users who have a
corresponding SmartCard.
To Next Page
Loading...
Need help?
General
