Fujitsu AB A30LBT Series User Manual

03-03
1-7. Setting Other Functions
The following settings are also possible, depending on the operating conditions.
Setting Description Function Number Setting Value
Yes
No
40
00
01
Auto Restart
Setting Description Function Number Setting Value
No
Yes
42
00
01
Indoor Room Temperature Sensor Switching Function
(Only for Wired remote controller)
If setting value is “00”,
room temperature is controlled by the indoor unit temperature sensor.
If setting value is “01”,
room temperature is controlled by either indoor unit temperature sensor
or remote control unit sensor.
Setting Description
Function Number Setting Value
Standard
Lower control
Slightly warmer control
Warmer control
31
00
01
02
03
1-6. Setting the Heater Room Temperature Correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be changed as shown in the table below.
1-5. Setting the Cooler Room Temperature Correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be selected as shown in the table below.
Setting Description Function Number Setting Value
Standard
30
00
01
( Factory setting)
Lower control
( Factory setting)
( Factory setting)
( Factory setting)

Fujitsu AB A30LBT Series Specifications

General

Brand	Fujitsu
Model	AB A30LBT Series
Category	Air Conditioner
Language	English