Fujitsu AIRSTAGE UTY-DCGGZ2 - Remote Controller Group and Address Setting

En-6
1-2-2. RemoteControllerGroupandAddressSetting
Address setting to this controller is required to assign the air conditioners with remote controller group.
Address is set automatically or manually for each refrigerant system.
Name Description
G Refrigerant system address (0-99):
This is the ID individually assigned to each refrigerant system and is used
for control.
H Indoor unit address (00 - 63):
This is the ID individually assigned to each indoor unit and is used for
control.
J Remote controller address (0-15):
This is the group of indoor units that have been connected with remote
controller cable, or single indoor unit.
K R.C.G. address:
Remote controller group (R.C.G.) address is made up of the refrigerant
system address and the indoor unit address of indoor unit with remote
controller address “0”.
(Hereafter Remote controller group is called “R.C.G.”)
Example) Refrigerant system address=00
00
00
00
00 02 200 01 100 00 0
K
G
G
H
J
00 03 0
Refrigerant system address=01
K
01
01
01
G
01 02 201 01 101 00 0 01 03 0