To Next Page

To Previous Page

UTY-RSNYM

 Button name and function

During address setting mode, indoor unit reject the any operation command from remote controller.

Function number

Refer to Function details

Remote controller address

FAN button

Each time this button is

pressed, the fan setting

changes among “Remote

controller address,” “Function

number” and “Setting number.”

Setting number

Refer to Function details

START/STOP button

Transmits function setting

SET TEMP. “

” and “

” button

Switches the various numbers.

 Function setting procedure

1. Connect the power supply of the outdoor unit.

2. Switch to the function setting mode.

To enter the function setting mode, hold down the 3 buttons of SET TEMP.

, SET TEMP.

and FAN at the same time for 5 seconds or longer.

Function setting mode initial display

3. Press the FAN button.

The Function number indicator flashes. Then, press either the SET TEMP.

button or the

SET TEMP. button to set up the function number.

Function number

- 245 -

15-4. Indoor unit (setting by simple remote controller) 15. Function settings

2-UNIT

MULTI-SPLIT TYPE

2-UNIT

MULTI-SPLIT TYPE

Fujitsu AOYG14KBTA2 User Manual

Other manuals for Fujitsu AOYG14KBTA2