Fujitsu D3236-S User Manual

a
g
e
3
Page
TechNotes D323x-S_D3243-S V1.2 Page 33 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards
mainboards
Interfaces & Connectors
3.16 Fan Connectors
Pin
Signal
1
GND
2
12V
3
FAN Sense
4
FAN PWM
Fan speed control is supported for 4 pin (PWM) fans.
Fan3 can be changed from 4-pin mode to 3-pin controlled mode via BIOS Setup.
3-pin fans (voltage controlled) connected to Fan1/Fan2/Fan4 connector will always operate at full speed resp. 12V supply voltage!
Fan current: max. 2A continuous / 4A peak (D323x-S)
max. 1.5A continuous / 3A peak (D3243-S)
3.17 Power Supply Fan Connector
Pin
Signal
1
Not connected
2
PS Fan PWM
3
Not connected
4
PS FAN Sense
5
Not connected
6
Not connected
7
Not connected
8
GND
Note: This feature is not supported by standard ATX power supplies!
The power supply fan connector is shared with FAN4 connector on D3231-S/D3236-S (BIOS Setup option), they must not be used simultaneously!
Note:
Fans must never be attached or
removed while the system is
powered. Mainboard may be
damaged!
Pin 1
Pin 1

Fujitsu D3236-S Specifications

General

Brand	Fujitsu
Model	D3236-S
Category	Motherboard
Language	English