Getting started
Getting s tarted
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommend ed not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofd eliveryPackaging,
► Unpack all th e individual parts.
► Check the contents of the p ackage for any visible damage caused during transport.
► Check whether the delivery confo rms to the details in the delivery note.
► Should y ou discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfi rstuse, overviewPreparingforuse,
Only a few steps are necessary to put your new device into operation for the first tim e:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not insta ll
them until after first-time setup. H ow to install drives and boards is described
in the "
System expansions", Page 28 chapter.
Fujitsu 11
To Next Page
Loading...
