System expansio ns
Installing a hard disk drive
► Open the casing (see "Opening the casing", Page 30).
Harddiskdr ive,
► Take the new hard disk drive out of its packaging.
1
2
2
2
2
► Slide the hard disk drive into the casing (1). Make sure that the screw holes are aligned.
► Press gently against the hard disk drive from below and secure it with the screws (2).
► Connect the cables (data cable, pow er supply) to the drive.
Check that the polarity is correct and do not use any force .
► Close the casing (see "
Closing the casing" , Page 31).
Fujitsu 37
To Next Page
Loading...
