Getting started
Connecting a monitor
► F ollow the instructions conta ined in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the mon itor into the monitor port of your device.
The optional monitor power cable may only be connected to the monitor socket of
the device if the mon itor current consumption is less than 1 A with 240 V or 2 A
with 100 V. The values for the mo nitor current consumption can be found in the
technical data on the monitor or in the operating manual for the monitor.
► Plug the monitor power ca
ble into the grounded mains outlet.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device .
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse w h en
the device is s witched off and then switch the device o n again.
► C onnect the PS/
2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Con necting,PS/2mouse,
► Switch your device on again.
Connecting the keyboard
You can connect a USB keyboard or a PS/2 keyboard to your device .
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Connecting,
► Insert the flat rectangular USB plug of the keyboard cable into one of the device’s USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
Conne
ctingaPS/2keyboard
Conne
cting,
The P S/2 keyboard is only detected b y the d evice if you connect the keyboa rd
when the device is switched off and then switch the device on again.
► Sw itch your device off.
► Plug t
he round plug of the keyboard cable into the keyboard port on the device.
Keyboard,
► Switch your device on again.
14 Fujitsu
To Next Page