Getting started
Switching on for the first time: installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The insta llation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the d e vice is integrat
ed into a network, the user and server details as well as
the network protocol ar
e required during the software installation.
Contact your network ad
ministrator if you have any questions about these settings.
When you switch on the d
evice for the first time, the supplied software
is installed and config
ured. Plan a reasonable amoun t of time for this,
as this process must n
ot be interrupted.
You may need the lic
ence number for Windows during the installation. You can find the licence
number as a label on
your device ( no longer applies to Windows 8 or higher).
16 Fujitsu
To Next Page
Loading...
