Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always take hold of the actual plug. Neve r unplug a cable by pulling the cab le itse lf.
Ports on the device
Interf acesExternaldevicesDevice
The ports available on your device depend on the s elected device con figuration level.
The ports are located on the front and ba ck of the device. The ports available on your
device depe nd on the config uration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the ma inboard.
DVI monitor p ort, white
Monitorport
VGA m o nitor port, blue
Monitorport
Microphone jack
Microphoneport
Audio input (Line In)
AudioinputLinein
Headphones port
Headphones
Audio output (Line Out)
AudiooutputLineout
USB 2.0 - Universal Serial
Bus, black
USB 3.0 - Universal Serial
Bus, blue
UniversalSerialBus
LAN port
LANport
PS/2 mouse port, green
MouseportPS/2mouseport
Keyboard port, purple
Keyboardport
e-Sata
e-SATA port
S/PDIF
S/PDIF port
Serial port, turquoise
Serialport
DP DisplayPort
Some of the peripherals require special software (e.g. drivers) (refer to the
documentation for the peripheral and operating system).
Fujitsu 13
To Next Page
Loading...
