Operation
Indicators on the device
Indicators,Device
The indicat ors are on the front of the c asin g. Which indicators are available on your
device depends on the configuration level you have selected.
3
1
2
1 = Drive indicator, e.g. DVD
2 = Power-on indicator
3 = Hard disk indicator
No. Indicat or Description
1 Drive indicator
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
2 Power-on indicato r
Caution: When energy saving mode is active, the device must
not be switched off at the main power switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator is illuminated:
The device
is switched on.
• The indicator is flashing:
The devic
e is in energy-saving mode. After being switched on
with the O
N/OFF switch , the device powers up or returns to the
state it w
as in before it entered energy-saving mode.
• The indicator is not lit:
The dev
ice is switched off.
3Harddi
sk indicator
The indicator lights up when th e hard disk drive of th e device is
accessed.
Fujitsu 19
To Next Page
Loading...
